| | |
|
| |
| | |
|
|
Maytech 30amp 400Hz Refresh ESC
|
|
In Stock
Item Number: MT30A-BEC
|
Maytech Harrier-Suprem 30 Amp Brushless ESC With 5V/3A BEC V1
Fast 50-400hz Refresh Rate
V1: Users can adjust frequency 8KHz/16KHz
Excellent for use with most Multicopter systems right out of the package. No need for complicated modifications.
Excellent Reliability- This is not your average ESC.
MontoRC has been selling Maytech Harrier Suprem since Jan 2011, and it has the best
reliability rate with our customers of any brand of esc we have ever sold.
We have sampled many brands of esc. Many of them look alike, and some appear to share some of the same components. For as many different brands as are on the market, there are just as many levels of quality of assembly. There are a lot of shops ordering the same or similar core components and slapping them together under their own name brand. Maytech obviously takes care to make this a flawless product. This Maytech Harrier Suprem has proven itself to be very well assembled.
Cont. Current: 30A
Burst (10sec): 40A
BEC: 5V/3A
Li-Po: 2-4Cells
Net Weight 29g
Size 42x25x9
Harrier-Suprem ESC's input rate: 50-400Hz
Program Method: TX/Prog Card
Includes detailed instructions and programming manual
Main Features:
- Extremely low internal resistance.
- Super smooth and accurate throttle linearity.
- Power arming protection: Prevents the motor from accidentally running when switched ON.
- Lost Throttle signal protection:
- The ESC will automatically reduces output power to the motor when it detects a lost of throttle signal for 1 second. A subsequent loss of throttle signal beyond 3 seconds will cause the ESC automatically to cut power to the motor.
- Safety thermal over-load protection:
- Automatically reduce output power to half when the temperature reaches 110Degrees Celsius, restore output power when the temperature is below 110 Degrees Celsius.
- Governor Mode: For Helicopter application.
- With latest humanize software design, especially for all types of brushless motor.
- Parameters programmable function to meet your specific needs.
Bullet connectors not included
Maytech Harrier-Suprem has worldwide reputation for extremely low internal resistance, Super smooth and accurate throttle linearity.
Tested at Monto RC for succesful operation with the (sometimes finicky) FY90Q quad controller.
Powering up the ESC for the first time and setting the Throttle Calibration
Harrier Suprem features Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to "learn and memorize" your Transmitter throttle output signals and only repeated if you change your transmitter.
· Switch your transmitter ON and set the throttle stick to maximum position.
· Connect the battery pack to ESC. Wait for about 2 seconds, the motor will beep twice, then put the throttle in minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter.
|
|
Maytech Harrier-Suprem 20 Amp Brushless ESC
50-400hz Refresh Rate. 5V/2A BEC, 8/16KHZ Frequency
|
|
|
Product Reviews
| (22 Ratings, 2 Reviews) |
Average Rating:
|
Good Combo
Gavin C.
(Berkeley, CA)
3/22/2012 9:20 PM
I now have 12 of these. Most recently combined with my DJI Naza and Avroto 2814. They've been easy to calibrate. Easy to use. Never a glitch. Thank you Monto for the fast shipping, and great parts.
|
Worked on my openpilot
Asa B.
(San Diego, CA)
2/9/2012 8:23 PM
Worked fine on my openpilot controller. Easy to program. I wish it was lighter.
|
| 
|
|